Next generation 10/D/2010, Инструкции по установке и использованию

Страница: 29 / 35

The following instructions apply to accessories that may be supplied with this restraint at point of purchase. If
not, a variety of accessories are available from various retailers of Next Generation Nursery Products Pty Ltd.
In the case of a small baby, accessories are available to improve the installed position of the baby in the restraint.
PADDED INSERT (IF SUPPLIED)
The Padded Insert is designed to snugly support the baby for extra comfort.
Simply place the padded insert on the restraint between Harness straps
and the restraint back. Ensure padded insert is lined up with or below the
shoulder straps. Discontinue use if the Insert causes discomfort.
SHOULDER PADS (IF SUPPLIED)
Shoulder Pads are designed to provide extra comfort for baby
or child and are easily fitted to the shoulder harness straps by:
i. Pull apart fasteners and remove shoulder pads from harness.
ii. Re-fit shoulder pads to harness and attach fasteners for use.
If threads on the shoulder strap disconnect the strap as detailed
on page 16 and remove one at a time.
MESSY MAT™ SEAT PROTECTOR
Place ribbed or pocket end of the Messy Mat™ seat protector
on edge of car seat, smooth back toward seat join (A) and fit in
any excess Messy Mat™ into the join of the car seat (A).
NOTE: The pocket is only for small, light items. DO NOT overload
the pocket with heavy, bulky items as this may damage the pocket
or cause passengers to trip over them.
Padded
Insert
Crotch
Pad
Pocket
Messy Mat
Shoulder
Pads
56
ACCESSORIES & FEATURES
57
Ribs
Pockets (if
supplied)
Long Messy Mat ™
Short Messy Mat ™
Ribs
Pockets (if
supplied)
A
A
TO REPLACE COVER
1. Fit cover over restraint starting at top ensure that both back and bottom elastics are at the back of
restraint.
2. Stretch bottom elastic over the recline foot under the restraint.
3. Align cover with the seat.
4. Fit and align headrest cover over headrest shell.
5. Feed shoulder Harness Straps through matching slots on the headrest and restraint, and re-attach to strap
connector at the back of the seat or refit the Child Harness.
6. Feed Crotch Buckle through slot in cover.
7. Feed Harness Adjustment Strap through the cover at the front.
8. Refer to appropriate sections in this book for full details. From page 13 for in-built harness or from page 44
for a Child Harness.
9. Feed the cable for the speakers (if supplied) as shown on page 58.
HOW TO CLEAN
IMPORTANT: ONLY USE SEAT COVERS AND ACCESSORIES THAT ARE DESIGNED
AND TESTED FOR USE WITH THIS PRODUCT AND RECOMMENDED BY NEXT GENERATION
NURSERY PRODUCTS PTY. LTD.