Next generation 10/D/2010, Инструкции по установке и использованию

Страница: 21 / 35

HOW TO INSTALL WITH A CHILD HARNESS HOW TO INSTALL WITH A CHILD HARNESS
40 41
INSTALLING CHILD HARNESS INTO SEAT
A. If the seat is fitted to the car, remove it as
it will be easier to fit the child's harness.
B. Prepare the child harness by lengthening the child
harness by pressing the adjuster button (1) and
pulling the shoulder strap (2).
Left hand Strap
Adjuster under
cover
Attachment Clip
Cross Strap
C. Adjust headrest to the appropriate
height and lock in to position. Feed
the left hand Harness Strap & Cross
Strap through the appropriate right
hand upper slot in the headrest and
then over the top of the seat back.
See page 39. (It may be easier to
fit the child harness if the headrest
is fully raised but remember to
reposition the headrest so it is just
above the child's shoulders.)
D. Pull the left hand Harness Strap &
Cross Strap through the opposite
shoulder slot. Make sure that the
Anchor Clip also feeds through to
the back of the restraint. Hook the
Attachment Clip onto the Harness
VERSA TETHER™ Catch and ensure that
the straps line up to an equal length.
Hook the Attachment Clip
onto
VERSA TETHER ™ Catch.
Pull left hand
Harness Strap
through the
opposite slot until
the straps are of
equal length.
Feed left hand Harness
Strap and Cross Strap
through right hand slot
and over the top of
the seat.
BOOSTER SEAT WITH CHILD HARNESS BOOSTER SEAT WITH CHILD HARNESS
2
1