Next generation 10/D/2010, Инструкции по установке и использованию

Страница: 28 / 35

Click
CARE & MAINTENANCE
54
HOW TO CLEAN
A. Disengage Harness Tongues from Harness
Crotch Buckle. Remove the cable for the
speaker if fitted to the cover.
B. Feed the Shoulder & Lap Harness Straps
through the slots in the restraint and headrest.
C. Peel headrest cover away from shell.
D. Feed Crotch Buckle & harness adjustment strap
through slot in cover.
E. Peel cover away from outer rim starting at
from under restraint. Then lay restraint on its
back ensuring recline foot is in upright mode
& stretch bottom elastic over recline foot
towards the back of the restraint.
F. Reposition restraint upright and continue to
peel cover off the restraint until completely
removed.
55
Cover
Body
3- bar slide
REGULAR CARE OF THIS RESTRAINT:
Please check the following items regularly to ensure the safety of your child:
A. Check the webbing for fraying.
B. Check that the buckle clicks and is not sluggish or sticky in operation.
C. Ensure there are no cracks in moulding or the plastic moulding.
D. Check the harness adjuster is operating and is clamping the webbing.
E. If any part of the restraint is cracked or broken, seek repair immediately
or replace the child restraint.
F. Use only mild soap and water to clean all metal and plastic parts of the
restraint. Do not use chemicals or cleaning agents.
TO CLEAN HARNESS BUCKLE:
If sticky liquids such as baby formula, fruit juice, etc. get inside your Harness
Buckle, it may become sluggish. An indication of a sluggish Harness Buckle is
that you cannot hear a click when engaging the Harness Tongues. To restore
the Harness Buckle to good working order it needs to be cleaned as follows:
A. From the underside of the restraint pull each crotch 3-bar slide then turn
3-bar slide and push through each slot to remove the Harness Buckle
from the restraint.
B. Place the Harness Buckle under warm (max. 40 degrees Celsius) running
water as shown below. Let the water run through the mouth of the
buckle for five minutes.
C. Engage and disengage the Harness Tongues and Buckles several times
until a strong audible click is heard.
D. If you still cannot hear a strong audible click after engaging the Harness
Tongues & Buckle, then repeat cleaning several times. If the Harness
Buckle cannot be returned to its original working condition then contact
Next Generation Nursery Products Pty. Ltd. Customer Service.
E. Refit the harness buckle to the restraint with the red button facing out &
feeding each 3-bar slide through appropriate slot.
HOW TO CLEAN THE COVER
The restraint has a flame retardant cover which is removable for cleaning. Cleaning instructions are on the
care label attached to the cover. When washing cover engage hook & loop strips together to eliminate other
garments being caught. Use only mild soap and water to clean all metal and plastic parts of the restraint. Do
not use chemicals or cleaning agents.
COVER (STYLE MAY VARY)
The cover has been designed to protect your child when seated in the restraint. Care should be taken if
children either eat or drink while in the restraint as some food or drink products may cause damage or
marking to the cover.
IMPORTANT: Do not pull sticky items from covers as the cover may be damaged - soak in water and gently
remove.
TO REMOVE COVER
You do not have to remove the shoulder harness assembly from the restraint. However, you do need to
disconnect the shoulder harness straps by disconnecting the 3-Bar slide from 2-Bar slide at the base of the
restraint (opposite action of illustrations on Page 16).
B.
C.
A.
E.
D.