NEXIQ Technologies Brake-Link, Руководство пользователя

Страница: 88 / 112

82 Brake-Link™ Meritor WABCO ABS Application
Chapter 3
• Using Meritor WABCO ABS Application (Trailer)
4
Brake-Link™ auto-detects the Meritor WABCO Trailer ABS ECU. It pre-
sents the ECU sensor/modulator configuration and indicates whether
there are existing and/or stored faults.
Press to access the Meritor WABCO ABS Application main menu.
5
Next, it presents the
Meritor WABCO ABS Application
main menu; use the
and keys to scroll to FAULTS and press .
6
Brake-Link™ displays the Faults Menu ; select
CLEAR FAULT
and press
.
7
Brake-Link™ requests confirmation; use the and keys to select
YES
and press .
8
Next, Brake-Link™ displays a
Faults Cleared
message. Press to
return to the
Faults Menu
.
T R A I L E R 4 S / 3 M
E X I S T I N G F A U L T S YES
S T O R E D F A U L T S YES
[ E N T E R ] T O C O N T I N U E
If you receive CAN NOT IDENTIFY ECU :
• the detected ECU is not an Easy-Stop™ (TCS I) or Enhanced
Easy-Stop™ (TCS II) controller.
If you selected
J1708/J1587 BUS
protocol and it displays ECU
NOT RESPONDING ,
• the ECU or Data Bus is not working properly.
If you selected
PLC/ENHANCED MODE
protocol and it displays
ECU NOT RESPONDING ,
• the brake ECU is not equipped with Enhanced PLC Mode.
• the ECU or Data Bus is not working properly.
E C U I N F O R M A T I O N
F
A U L T S
D A T A L I S T
T E S T S