NEXIQ Technologies Brake-Link, Руководство пользователя

Страница: 14 / 112

8 Brake-Link™ Meritor WABCO ABS Application
Chapter 1
• Getting Started
Use the J560 PLC Cable Set in place of the Deutsch adapter if you plan to attach
to the tractor or trailer’s Power Line Connector.
To connect Brake-Link™ components and power-up:
1
Attach the Power/Data Cable DB15 Connector to the data port (labelled To
Vehicle
) on the Brake-Link™; tighten the thumbscrews.
2
Plug the Data Cable Atari End into the Atari End on the cable you attach to the
vehicle, i.e., Deutsch adapter or J560 PLC Cable Set.
3
Attach the vehicle interface cable to the vehicle.
—If you’re using the J560 PLC Cable Set, plug into the power line connector
on the outside of the trailer.
—If you’re using the Deutsch Adapter, plug into the Deutsch connector typi-
cally located under the dash on the driver’s side, beside the driver’s seat
or near the brake ECU on the trailer.
NOTE:
i
The trailer ECU must support Enhanced PLC Mode to use trailer power
line or tractor Deustch connectors.
4
If you’re using the J560 PLC Cable Set to attach to the trailer , connect the
alligator clips to an external power supply; otherwise, turn the tractor’s key
to the “on” position.
Figure 1.3
J560 PLC Cable Set
Quick
Disconnect