NEXIQ Technologies Brake-Link, Руководство пользователя

Страница: 53 / 112

- Using the Meritor WABCO ABS Application
Brake-Link™ Meritor WABCO ABS Application 47
Test Sensors
Use this test to monitor the inputs from the wheel sensors, one at a time. Rotate
each sensed wheel and verify a speed reading on the appropriate sensor. This
feature may be used to verify each sensor is assigned to the appropriate wheel.
The test begins by displaying all of the available wheel sensors with speed values
of >7rpm.
NOTE:
i
The wheel must achieve seven revolutions per minute before Brake-Link™
displays a wheel speed or spin sequence number.
Test sensor valve
via menu navigation
:
1
Connect Brake-Link™ to the tractor and power-up (see “Connecting
Brake-Link™ Components”, on page 8). Brake-Link™ starts and presents
the
Select Application
screen.
Use the and keys to select
MERITOR WABCO ABS
; press
.
2
Brake-Link™ displays navigation options; use the and keys to
select MENU NAVIGATION and press .
Brake-Link™ presents the Protocol Selection screen.
3
Use the and keys to select the desired option and press .
NOTE:
i
See “Selecting a Protocol”, on page 16.
Brake-Link™ auto-detects the Meritor WABCO ABS ECUs present for the
protocol you selected.
4
If both are detected, Brake-Link™ prompts you to select TRACTOR or
TRAILER; use the and keys to select TRACTOR .
S E L E C T A P P L I C A T I O N
G E N E R I C P L C T E S T
B E N D I X / K B / E A T O N A B S
M
E R I T O R W A B C O A B S