NEXIQ Technologies Brake-Link, Руководство пользователя

Страница: 86 / 112

80 Brake-Link™ Meritor WABCO ABS Application
Chapter 3
• Using Meritor WABCO ABS Application (Trailer)
6
Stored fault codes are displayed. If there is more than one, a down arrow
appears to right of the occurrence count and on the last stored fault, an up
arrow appears left of the FMI (Line 4). Scroll the display with the
and
keys.
—Line 1 shows the System ID (SID) description.
—Line 2 shows the Failure Mode Indicator (FMI) description.
—Line 3 shows the SID value in decimal and hexadecimal.
—Line 4 shows the FMI value in decimal and hexidecial, and an occurrence
count (e.g., x:002 indicates the fault occurred twice).
Brake-Link™ truncates some of the SID and FMI descriptions to fit the 20
character line display. Refer to Appendix A for full SID and FMI descriptions.
7
Press to return to the CONTINUE BY PRESSING BUTTONS prompt
or to return to the Select Application screen.
Clearing Stored Faults
CLEAR FAULTS clears stored fault codes from the ECU.
Once you repair a problem, the ECU moves the associated fault code to the stored
list for future reference. Use the stored faults list along with the
CLEAR FAULTS
option to detect intermittent problems. For example, repair the vehicle; then, clear
the stored fault codes before cycling power or performing a road test. A code that
appears in the stored list, that isn’t in the active list, after cycling power or road
testing, indicates an intermittent problem.
The rest of this section explains how to clear stored faults with each method of
navigation.
P O W E R S U P P L Y
L O W V O L T A G E
S I D : 0 1 4 ( 0 E h )
F M I : 0 0 4 ( 0 4 h ) x : 0 0 2
↓