NEXIQ Technologies Brake-Link, Руководство пользователя

Страница: 101 / 112

- Using the Meritor WABCO ABS Application
Brake-Link™ Meritor WABCO ABS Application 95
4
Brake-Link™ auto-detects the Meritor WABCO Trailer ABS ECU. It pre-
sents the ECU sensor/modulator configuration and indicates whether
there are existing and/or stored faults.
Press to access the
Meritor WABCO ABS Application
main menu.
5
Next, it presents the
Meritor WABCO ABS Application
main menu; use the
and keys to scroll to TESTS and press .
6
Brake-Link™ displays the
Tests Menu
; use the and keys to
position the cursor on
TEST SENSORS
and press .
T R A I L E R 4 S / 3 M
E X I S T I N G F A U L T S YES
S T O R E D F A U L T S YES
[ E N T E R ] T O C O N T I N U E
If you receive CAN NOT IDENTIFY ECU :
• the detected ECU is not an Easy-Stop™ (TCS I) or Enhanced
Easy-Stop™ (TCS II) controller.
If you selected J1708/J1587 BUS protocol and it displays
ECU
NOT RESPONDING ,
• the ECU or Data Bus is not working properly.
If you selected PLC/ENHANCED MODE protocol and it displays
ECU NOT RESPONDING ,
• the brake ECU is not equipped with Enhanced PLC Mode.
• the ECU or Data Bus is not working properly.
E C U I N F O R M A T I O N
F A U L T S
D A T A L I S T
T
E S T S