Nexcom NIO200 HAG, Руководство пользователя

Страница: 58 / 120

NIO200 HAG User Guide Page 58 of 120
state of the Wireless Hart communication. The value should be
interpreted as 16 bit big-endian integer with the following values:

128: Device Joined with fresh data

8: Device NOT joined and no data read so far

20: Device NOT joined but with stale data

24: Device Joined but no data read so far

4: Device Joined but with stale data
When register type
is “gw_info”, general gateway information will be exposed to Modbus,
using the following registers:
Register Item exposed Observation
<start_addr> + 0 Number of devices currently 16bit big-endian integer
connected.
<start_addr> + 1 Total number of burst messages. 16bit big-endian integer
<start_addr> + 2 Versa Router MAC 3 words * 16bit big-endian
unsigned integer
Note: For
register type “gw_info” the <word_cnt> must be 5.
When
register type is “gw_code_word”, the gateway’s “code word” will be exposed to Modbus. The
“code word” is read-only.
Note
: For register type “gw_code_word”, the <word_cnt> should be 16 or less.
The <EUI64> in “gw_info” and “gw_code_word” register lines should identify the WirelessHart
Gateway.
Accepted values: 001B1EF981000002, 0000000000000000, FFFFFFFFFFFFFFFF.
2. Click Save to add the new register line in the Registers list.