Nexcom NIO200 HAG, Руководство пользователя

Страница: 11 / 120

NIO200 HAG User Guide Page 11 of 120
4.5 Configuring the NTP settings
The NTP Settings can be changed in System
page. The user must click “Save” or “Click Save and Apply”
when done. It is strongly recommended to have access to the Internet in order to allow the NTP client
configured on the HAG to synchronize with external time servers present online. WIRELESSHART
mandates the existence of a master source clock exists in each network. In this implementation this role is
fulfilled by the Network Manager through the NTP application running on the device.
4.6 Monitoring Control System
WIRELESSHART specific network management and configuration takes place into the Monitoring Control
System (MCS). Steps to access the MCS:
Step Action
1. Open the following URL: http://<NIO200HAG_IP>:8080/ replacing <NIO200HAG_IP> with
NIO 200HAG Gateway IP.
Once the address is accessed, the login screen appears, as shown in the Figure 4.
2. Type the following user name and password in the Login fields:

Username: the username provided.

Password: use the password provided.
Note: the default username and password are admin and adminadmin .
3. Click the Login button.