NewTek TriCaster 450, Руководство пользователя

Страница: 49 / 368

Page | 33
The first tab in this panel is labeled Output . Optional settings for SD Analog Connections are
located in the central part of the panel ().
Figure 21
These settings provide optional configurations for the first
output connection, designated as
Output 1 (a.k.a. Program
out).
Note that the video format for
Row 1 output (and, for TriCaster
850 models, Row 2 ) invariably conforms to the format you
chose for the session (e.g., 1080i). The only suitable analog
connection type for HD is component, so the
SD Analog
Connection options are ghosted in HD sessions.
By contrast, SD sessions do support several optional connection
types. Choose between
Component connection or Com
Y/C in this case.
Selecting Com Y/C sends composite
video output to the second BNC connector
in an output row
( Y ), and Y/C to the third
and fourth connectors ( Pb and Pr ,
respectively).
3.12 CONFIGURE AUX VIDEO OUTPUT
Figure 23
The Aux video output allows you to
choose a different video source for
output if you wish, using the
Source
menu.
You can also choose from a wide array of output formats, and opt to send either the Master or
Aux audio mix to accompany it. Aux configuration and options are detailed later, in Section 7.1.4
Figure 22