NewTek TriCaster 450, Руководство пользователя

Страница: 236 / 368

Page | 220

T
RI
C
ASTER
EXTREME™ Group – Send the selected group (color) output to the Aux connectors.
The Stream sub-panel provides a method of independently adjusting (stereo) audio levels sent to
the network when streaming is enabled. Its sources options are similar to those above.
MASTER (AND PHONES) 13.3.2
The main Program outputs (labeled PGM on TriCaster’s backplate) are controlled by the Gain
knob and Balance control in the Master sub-panel, located at far-right in the Audio tab . Just
above this is a simple level control for the Phones output. Remember that both Aux and Phones
outputs are affected by source Solo switches. When Solo is on for one or more sources, only
those sources will be sent to Aux and Headphones .
13.4 ADVANCED AUDIO CONFIGURATION
T
RI
C
ASTER
EXTREME™ Each audio input (including
internal sources) as well as every output sports a
configuration button in their respective mixer panels.
Clicking the familiar ‘gear’ icon opens the new
Advanced Audio Configuration panel.
EQUALIZER 13.4.1
The seven-band equalizer allows you to ‘shape’
sound to taste, accommodate sources with different
acoustic characteristics (such as mismatched mics),
minimize feedback and roll off unwanted parts of the
audio spectrum.
Enable or disable the
Equalizer using the switch
beside the label above its control group. The sliders
attenuate or boost the tonal range centered on the frequency shown at the top, with the
amount of effect applied falling off toward neighboring frequencies on either side. Click
Reset to
return all sliders to 0dB.
Hint: Naturally, reducing or increasing hanging the level of one or more tonal bands affects
the overall output level as well. This may call for you to trim the main level setting for the
input or output involved.
Figure 219