B.
TCP/IP Command Set
B.
TCP/IP Command Set
This section provides a complete overview of the remote control commands of the
Pulse
Scout2
.
The command structure of the
Pulse
Scout2
is mostly in agreement with the SCPI-standard. How-
ever, A
·
P
·
E does not state compliance nor conformance to the standard, since some standard
commands are not yet implemented in the present version. Detailed information about the SCPI is
found at: www.ivifoundation.org
The autocorrelator will execute the following commands:
*IDN?
Get Device Identi cation
<idn>
Device Information (Vendor, Devicename, Serialnumber, Software Version, Firmware
Version) as string,
Example:
*IDN?
*RST
Perform Device Reset
Example:
*RST
*STB?
Get Status Byte
<stb>
SCPI Status Byte (8 Bit unsigned as decimal) Bit0: reserved Bit1: reserved Bit2:
Error Bit3: reserved Bit4: MAV Bit5: ESB Bit6: RSQ/MSS Bit7: OPE as integer,
Example:
*STB?
*CLS
Clear Status Byte (STB)
Example:
*CLS
Pulse
Scout2 Version 1.1
51
July 2015