manualshive.com logo in svg

Newport 2835-C, Руководство пользователя

Поделиться
Скачать
Newport 2835-C Скачать руководство пользователя страница 124

108

bit 4:  Message Available

The Message Available MAV bit becomes set when any message is
ready to be transmitted over the GPIB interface (not the RS-232 inter-
face).  Once the message is sent, the MAV bit is cleared.  A GPIB device
clear command will clear the output queue and, as a result, this bit.

NOTE:

After a query is issued over the GPIB interface this bit should be checked by
means of a serial poll before attempting to read the query response.

bit 3:  New Valid Data Available

The New Valid Data Available Channel B (NVDA) bit becomes set when
a new reading has been taken on channel B that is not overrange, did
not saturate the detector, did not cause a data error and was not taken
while ranging.  It is cleared by the R?, R_A?, RWS? or RWS_A? queries.

bit 2:  New Data Available

The New Data Available Channel B (NDA) bit becomes set when a new
reading has been taken on channel B.  It is cleared by the R?, R_A?,
RWS? or RWS_A? queries.

bit 1:  New Valid Data Available

The New Valid Data Available Channel A (NVDA) bit becomes set when
a new reading has been taken on channel A that is not overrange, did
not saturate the detector, did not cause a data error and was not  taken
while ranging.  It is cleared by the R?, R_A?, RWS? or RWS_A? queries.

bit 0:  New Data Available

The New Data Available Channel A (NDA) bit becomes set when a new
reading has been taken on channel A.  It is cleared by the R?, R_A?,
RWS? or RWS_A? queries.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание 2835-C




































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды