Newmac BC 160, Инструкция по установке, эксплуатации и обслуживанию

Страница: 15 / 50

14
Diagram #1
BOILER INSTALLATION ON NON-COMBUSTIBLE FLOOR
In order for unit to operate at peak efficiency, seal
between boiler and ashpit with a material such as
refractory cement
Note: In order to increase firebox capacity for
burning wood, do not use the grates.
Place 5 pcs 2 ½” x 4 ½” x 9” in back of ashpit.
To form firebrick floor in base of ashpit, use the
following brick and push back against full brick in
back of ashpit.
15 pcs – 1 ¼” x 4 ½” x 9”
Line the sides of the ashpit with firebrick as shown.
Place brick at front and slide to back using:
14 pcs – 1 ¼” x 4 ½” x 9”