Newland HR11+ Aringa, Руководство пользователя

Страница: 46 / 193

** Enter Setup
Exit Setup 34
Bad Read Message
Scan the appropriate barcode below to select whether or not to send a bad read message
(user-programmable) when a good read does not occur before trigger release, or the decode session
timeout expires, or the scanner receives the command string of “
7E 01 30 30 30 30 40 53 43 4E 43 54 4D
30 3B 03 ” (~<SOH>0000@SCNCTM0;<ETX>). This feasure is NOT available in the Continuous mode.
** Bad Read Message OFF Bad Read Message ON
A bad read message can contain two characters. To set a bad read message, scan the Set Bad Read
Message barcode, the numeric barcodes and the Save barcode. The default setting is none.
Set Bad Read Message
Example: Set the bad read message to “F”
1. Scan the Enter Setup barcode.
2. Scan the Set Bad Read Message barcode.
3. Scan the numeric barcodes “4” and “6” from the “Digit Barcodes” section in Appendix.
4. Scan the
Save barcode from the “Save/Cancel Barcodes” section in Appendix.
5. Scan the Exit Setup barcode.