Newland HR11+ Aringa, Руководство пользователя

Страница: 44 / 193

** Enter Setup
Exit Setup 32
Command Trigger Mode
Command Trigger Mode: The scanner activates a decode session when receiving the command string
of “ 7E 01 30 30 30 30 40 53 43 4E 43 54 4D 31 3B 03 ” (~<SOH>0000@SCNCTM1;<ETX>) or scanning
the Start Trigger Simulation barcode. The decode session continues until the barcode is decoded, or
the decode session timeout expires, or the scanner receives the command string of “ 7E 01 30 30 30 30
40 53 43 4E 43 54 4D 30 3B 03 ” (~<SOH>0000@SCNCTM0;<ETX>) or scans the Stop Trigger
Simulation barcode.
If the scanner receives the command string of “ 7E 01 30 30 30 30 40 53 43 4E 43 54 4D 30 3B 03 ”
(~<SOH>0000@SCNCTM0;<ETX>) or scans the Stop Trigger Simulation barcode during a decode
session, it will stop the decode session right away.
Command Trigger Mode
Start Trigger Simulation Stop Trigger Simulation
Note: Command Trigger mode is available only when the scanner uses RS-232 or USB COM Port
Emulation. If you select this scan mode while using USB HID-KBW, USB HID-POS or IBM SurePOS
communication, the scanner will ignore this setting and automatically switch to the Blink mode.