Newland HR11+ Aringa, Руководство пользователя

Страница: 35 / 193

** Enter Setup
23 Exit Setup
Auto Mode
Auto Mode: Pressing the trigger activates a decode session. The decode session continues until the
barcode is decoded or the decode session timeout expires (default: 15 seconds; user programmable).
The scanner automatically starts one session after another until you press the trigger a second time.
Auto Mode
Decode Session Timeout
Decode Session Timeout: This parameter sets the maximum time decode session continues during a
scan attempt. It is programmable in 1,000ms increments from 1,000ms to 15,000ms. When it is set to 0,
the timeout is infinite. The default timeout is 15,000ms.
To program this parameter, scan the Decode Session Timeout barcode, the numeric barcodes and the
Save barcode. To find the numeric barcodes, see the “Digit Barcodes” section in Appendix.
Decode Session Timeout
Example: Set the decode session timeout to 2,000ms
1. Scan the Enter Setup barcode.
2. Scan the Decode Session Timeout barcode.
3. Scan the numeric barcodes “2”, “0”, “0” and “0” from the “Digit Barcodes” section in Appendix.
4. Scan the
Save barcode from the “Save/Cancel Barcodes” section in Appendix.
5. Scan the Exit Setup barcode.