Newland HR11+ Aringa, Руководство пользователя, Страница: 28 / 193

** Enter Setup
Exit Setup 16
Beep on BEL Character
You may wish to force the scanner to beep upon a command sent from the host. If you turn the feature on
with the following command, the scanner will beep every time a <BEL> character is received from the
host. <BEL> is issued to gain a user’s attention to an error or other important event. This setting is for
temporary use and will be lost after removing the power from the scanner, or turning off or rebooting it.
BEEPONxxFyyT (xx: The desired frequency, 1-20000Hz; yy: The The desired duration, 1-20000ms)
Example: Set the frequency of the beep to 2000Hz and the duration to 50ms
Enter: 7E 01 30 30 30 30 40 42 45 45 50 4F 4E 32 30 30 30 46 35 30 54 3B 03
(~<SOH>0000# BEEPON2000F50T;<ETX>)
Response: 02 01 30 30 30 30 40 42 45 45 50 4F 4E 32 30 30 30 46 35 30 54 06 3B 03
(<STX><SOH>0000# BEEPON2000F50T<ACK>;<ETX>)