Newland HR11+ Aringa, Руководство пользователя

Страница: 27 / 193

** Enter Setup
15 Exit Setup
The value of the StoreType field in a query command can be either “
@
” (HEX: 40 ) or “#” (HEX: 23 ).
A query command with the SubTag field omitted means to query all the settings concerning a tag. For
example, to query all the current settings about Code 11, you should enter 7E 01 30 30 30 30 40 43 31 31
A 3B 03 (i.e. ~<SOH>0000@C11*;<ETX>).
Responses
Different from command sequence, the prefix of a response consists of the six characters of
“<STX><SOH>0000” (HEX:
02 01 30 30 30 30 ).
The scanner responds to serial commands with one of the following three responses:
<ACK> (HEX: 06 ) Indicates a good command which has been processed.
<NAK> (HEX: 15 ) Indicates a good configuration command with its Data field entry out of the
allowable range for this Tag and SubTag combination (e.g. an entry for an
inter-keystroke delay of 100 when the field will only allow 2 digits), or an invalid
query command.
<ENQ> (HEX: 05 ) Indicates an invalid Tag or SubTag command.
When responding, the scanner echoes back the command sequence with the status character above
inserted directly before each of the punctuation marks (the comma or semicolon) in the command.
Examples
Example 1: Enable Code 11, set the minimum and maximum lengths to 12 and 22 respectively.
Enter: 7E 01 30 30 30 30 40 43 31 31 45 4E 41 31 2C 4D 49 4E 31 32 2C 4D 41 58 32 32 3B 03
(~<SOH>0000C11ENA1,MIN12,MAX22;<ETX>)
Response: 02 01 30 30 30 30 40 43 31 31 45 4E 41 31 06 2C 4D 49 4E 31 32 06 2C 4D 41 58 32 32 06 3B 03
(<STX><SOH>0000C11ENA1<ACK>,MIN12<ACK>,MAX22<ACK>;<ETX>)
Example 2: Query the current minimum and maximum lengths of Code 11.
Enter: 7E 01 30 30 30 30 40 43 31 31 4D 49 4E 2A 2C 4D 41 58 2A 3B 03
(~<SOH>0000C11MIN*,MAX*;<ETX>)
Response: 02 01 30 30 30 30 40 43 31 31 4D 49 4E 31 32 06 2C 4D 41 58 32 32 06 3B 03
(<STX><SOH>0000C11MIN12<ACK>,MAX22<ACK>;<ETX>)