Newland HR11+ Aringa, Руководство пользователя

Страница: 138 / 193

** Enter Setup
Exit Setup 126
Check Character Verification
Check characters are optional for Code 93 and can be added as the last two characters, which are
calculated values used to verify the integrity of the data. By default, the scanner does not transmit check
characters after verification.
Disable: The scanner transmits Code 93 barcodes as is.
Do Not Transmit Check Character After Verification: The scanner checks the integrity of all Code 93
barcodes to verify that the data complies with the check character algorithm. Barcodes passing the
checks will be transmitted except the last two digits, whereas those failing them will not be transmitted.
Transmit Check Character After Verification: The scanner checks the integrity of all Code 93 barcodes
to verify that the data complies with the check character algorithm. Barcodes passing the checks will be
transmitted, whereas those failing them will not be transmitted.
Disable Transmit Check Character After Verification
** Do Not Transmit Check Character After Verification
Note: If the Do Not Transmit Check Character After Verification option is enabled, Code 93 barcodes
with a length that is less than the configured minimum length after having the two check characters
excluded will not be decoded. (For example, when the
Do Not Transmit Check Characters After
Verification option is enabled and the minimum length is set to 4, Code 93 barcodes with a total length of
4 characters including the two check characters cannot be read.)