** Enter Setup
43
Exit Setup
ACK/NAK Retry Count
This parameter specifies the number of times the scanner retries a barcode transmission when it awaits
an ACK or NAK response from the host. The selection range is from 1 to 254 retries. A selection of 0
disables the count; a selection of 255 means unlimited retries. The default value is 3 (retries).
Set ACK/NAK Retry Count
Example: Set the ACK/NAK Retry Count to 200
1. Scan the
Enter Setup
barcode.
2. Scan the
Set ACK/NAK Retry Count
barcode.
3. Scan the numeric barcodes “2”, “0” and “0” from the “Digit Barcodes” section in Appendix.
4. Scan the
Save
barcode from the “Save/Cancel Barcodes” section in Appendix.
5. Scan the
Exit Setup
barcode.
ACK/NAK Timeout
This parameter specifies the amount of time the scanner waits for an ACK character from the host
following a barcode transmission. A selection of 0 disables the timeout.
ACK/NAK Timeout:
0-75
, corresponding to 0ms, 200ms (
default
), ..., 15,000ms, in 200ms increments
Set ACK/NAK Timeout
Example: Set the ACK/NAK Timeout to 400ms
1. Scan the
Enter Setup
barcode.
2. Scan the
Set ACK/NAK Timeout
barcode.
3. Scan the numeric barcode “2” from the “Digit Barcodes” section in Appendix.
4. Scan the
Save
barcode from the “Save/Cancel Barcodes” section in Appendix.
5. Scan the
Exit Setup
barcode.
Содержание HR11+ Aringa
