newell DYMO RHINO 6000+, Руководство пользователя

Страница: 22 / 41

DRAFT
18
RHINO
™
6000+
User Guide
Creating a Vertical Label
You can choose to print a label with the text running vertically. A label with multiple
lines of text will print as multiple columns of text.
To print a vertical label
1
Press GENERAL.
2
Select the Portrait as the orientation property.
3
Select Done (ESC) to create the label.
4
Enter the text and formatting for the label and press PRINT .
Creating Cable Wrap Labels
A Cable Wrap label is placed around the width of a wire or cable. You can enter up
to five lines of text and the text is repeated as many times as possible depending
on the size of the text and the length of the label.
The label properties you can set are:
To create a vertical wrap label
1
Press CABLE.
2
Select Cable Wrap and press OK .
3
Select the properties desired.
4
Select Done (ESC) to create the label.
5
Enter the text for the label and press PRINT .
To create multiple labels quickly, see Creating a Series of Labels on page 12.
Creating Flag Labels
Flag labels wrap around a wire or cable leaving the text part of the label extending
out from the cable. The text on flag labels is automatically printed on both ends of
the label leaving a blank space in the middle that wraps around the cable. When
the label is applied to the cable, both ends of the label are applied back to back
leaving a tail or
flag . The result is a label that can be read from both sides.
Cable type CAT 5/6, COAX, AWG: 4/0 - 2/0, AWG: 0 - 2, AWG: 3 - 5, AWG: 6+, or
Custom
Cable diameter Use when Custom is selected for Cable type.
Minimum: 5/32” (4 mm)
Maximum: 2” (50.8 mm)
Text repeat
AUTO or up to 15 times.