27-November-13 Phone: 1.800.325.7867 Fax: 1.636.925.0029 www.newcocoffee.com
9
To Program a selector switch:
1. On the selector switch control
panel, press the switch that you
want to program. The display
will change to identify the
switch that you have chosen.
(b01 thru b06 are the switch
identifiers.) See figures 8 & 9.
2. Press Enter. The number “1” and the current speed for pump 1
will appear in the display. As shown in figure
10.
3. Using the
+
or
–
button to scroll, set Pump 1 speed for the
desired ratio using chart A above as a guide. (If blending two
products, use chart B as a guide.) As shown in figure 11.
4. Press the “ Enter” to save and proceed to set Pump 2. The
number “2” and the current pump speed setting for Pump 2 will
appear on the display. As shown in figure 12.
5. Using the + or – button, set Pump 2 speed for the desired ratio using Chart A as a guide. (If
blending 2 products, use Chart B as a guide.) Refer to fig. 11 – step 3.
Fig 11
Fig 12
Fig 9
Fig 10
Fig 8