New Holland Haybine 499, Руководство оператора

Страница: 118 / 128

SECTION 6 - OPTIONAL EQUIPMENT
6-4
1
10004737
2
3
6
7
9
10 11
8
7
4
3
5
RIGHT
SIDE
LEFT
SIDE
6
DESCRIPTION PART QUANTITY
NUMBER REQUIRED*
1 0.3 mm
″
(0.010) shim. Use as needed under all knife clips. 244500 23
2 1 mm ()0.036
″
shim. Use as needed under all knife clips. 199283 23
3 3 mm (0.120
″
) shim. Use one between cutter bar and all guards
to left of special center guard. Use one between cutter bar and
knife clip at special center guards and guards on right half of cutter bar. 634780 5
4 Knife clip. Use at OUTER REGULAR stub guards. 767636 2
5 Knife clip. Use at all guards except two outer guards on each side. 767636 21
6 Right stub guard. No knife clip used. 858774 1
7 Regular stub guard 858764 22
8 Center stub guard 858765 1
9 Left stub guard. No knife clip used 858775 1
10 2
″
guard bolt 280804 4
11 1-3/4
″
guard bolt 88807 39
*Quantity required is minimum number required if all the original shims, bolts, and nuts can be reused. Extra shims, 1 and
2, may be required to obtain 0.001
″
to 0.015
″
(0.03 mm to 0.38 mm) clearance between knife sections and knife clips.