NEW BRUNSWICK SCIENTIFIC BioFlo CelliGen 115, Руководство по эксплуатации

Страница: 63 / 154

51
New Brunswick Scientific User’s Guide
6.2.2 Start-Up Screen
The Start-Up screen, which tells you which operating software version is
installed in your BioFlo/CelliGen 115, is first screen you see each time you
turn on the power, if you have already calibrated the touchscreen (
see Section
6.2.1
). This screen remains in view for a few seconds, then it is replaced by
the SUMMARY Screen.
6.2.3 Summary Screen
The SUMMARY screen (
see Figure 19a
) is command central; it puts all the
available loops at your fingertips.
Your BioFlo/CelliGen 115 controller can run as many as three stations; the
dark blue Unit Tab identifies which vessel’s operating parameters are being
displayed (in the sample screen, the unit being displayed is labeled “Unit 2”); if
you have more than one unit, pressing another Unit tab will move you to the
SUMMARY
screen for Unit 1 or, if present, Unit 3.
Figure 19a: Sample SUMMARY Screen (Fermentation with Auto Gas Mix)
Current DATE
& TIME
SCREEN
NAME and
ICON
Your BioFlo/CelliGen
115 comes with
pre-assigned
loop names. The
available loops will
change depending on
your system’s
configuration. This
one is equipped with
automatic Gas Mix.
OPERATING
MODE
SCREEN ACCESS
Ö
buttons
UNIT TABS
#
NOTE:
The dark blue button usually represents the screen being
displayed.