background image

NTI Secure Remote Power Reboot Switch 

 

49

 

Login Alert Settings 

The IPDU-Sx can be configured to send an alert to users in either group 1 or group 2 when a user logs in or when someone 
attempts to login but fails to enter a correct password.   To disable this feature, just select “Disable Alerts”.  

 

Once selected, be sure to select whether the alerts should be sent via Syslog, SNMP, and/or E-mail.      

 

Be sure to press 

Save

 after changes are made.  

IP Filtering 

Included in the Security Configuration options is IP Filtering.   IP Filtering provides an additional mechanism for securing the 
IPDU-S

x

.  Access to the IPDU-S

x

 network services (SNMP, HTTP(S), SSH, Telnet) can be controlled by allowing or disallowing 

connections from various IP addresses, subnets, or networks.   

 

Up to 16 IP Filtering rules can be defined to protect the IPDU-S

x

 from unwanted access from intruders.  Each rule can be set as 

Enabled or Disabled.  Rules can be set to explicitly drop attempts to connect, or to accept them.    

 

Be sure to press 

Save

 after changes are made.  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                         Figure 52- Security Configuration- IP Filtering Rules 

 

Содержание ENVIROMUX IPDU-Sx
























































































































Отзывы: