NTI Secure Remote Power Reboot Switch
45
LDAP Account Settings
Common Name (for LDAP)
“Common Name” assigned in the LDAP server account in an Active Directory. Often a name
assigned that is different than the Username. If this is the same as the Username in the
“Account Settings” (above), this can be left blank.
Organizational Unit (for LDAP)
Enter the Organizational Unit the user belongs to in an Active Directory
Format is <ou,ou,etc> (like example in Figure 48)
Contact Settings
Group 1
Place a checkmark if the user should receive messages from sensors, IP devices and outlets in
Group 1 (see also pages 24 and 26 for group assignments)
Group 2
Place a checkmark if the user should receive messages from sensors, IP devices and outlets in
Group 2 (see also pages 24 and 26 for group assignments)
Email alerts
Place a checkmark if the user should receive messages via email
Email address
Enter a valid email address if this user should receive email alert messages
Syslog alerts
Place a checkmark if the user should receive alerts via syslog messages
SNMP traps
Place a checkmark if the user should receive alerts via SNMP traps
Syslog/SNMP IP address
Enter a valid syslog/SNMP IP address for the user to receive syslog/SNMP messages
SMS Alert
Place a checkmark if the user should receive alerts via SMS messages (IPDUS4/S8 only)
Phone Number
Enter a phone number for the GSM modem to call to alert the user via SMS message
Schedule Settings
Schedule Type
Always active
- user will receive messages at all hours of each day
Active during defined times
- user will only receive alert messages during times as
outlined below
Start Day
First day of the week the user should begin receiving messages
End Day
Last day of the week the user should receive messages
Note: Start Day and End Day must be different, or no messages will be sent.
Start Hour
First hour of the day the user should begin receiving messages
End Hour
Last hour of the day the user should receive messages
