Page 8 of 66.
Title TransVu 3 DVR Installation Manual
NetVu Ltd.
No 1 Thellow Heath Park, Northwich Road, Northwich, Cheshire. CW9 6JB
It should be mounted as low as possible within the vehicle, on a secure base free from resonance
and secondary vibrations.
The TransVu 3 is secured to the mounting plate via four shock absorbing fixings. This dramatically
reduces the effects of vehicle borne vibrations and enables the system to operate in harsh shock
environments.
To mount the TransVu 3 on to the baseplate take the following steps:
1.
Fix each of the four shock absorbers to the TransVu base from underneath using two 6 UNC
screws provided. These must be fixed using loctite on the screw threads.
2.
Fit the lower washer to the stud.
3.
Lower the TransVu and mounted shock absorbers onto the baseplate, refer to
“Mounting
the Baseplate”.
4.
Put a snubbing washer on each of the four studs on top of the shock absorbers.
5.
Fix the TransVu in place by using four 8 UNC Nylock nuts.
