Page 44 of 66.
Title TransVu 3 DVR Installation Manual
NetVu Ltd.
No 1 Thellow Heath Park, Northwich Road, Northwich, Cheshire. CW9 6JB
Set: If ticked, actions will be taken if the TransVu is in SET mode (can be controlled using Alarm
input 6, an SIA Alarm Panel or some other input).
Unset: If ticked, actions will be taken if the TransVu is in UNSET mode (can be controlled using
Alarm input 6, an SIA Alarm Panel or some other input).
Activity Profile Change: If ticked, activity detection will change the recording profile from NORMAL
to EVENT while activity detection event is active and then back to NORMAL when the event ends.
VMD Profile Change: If ticked, VMD will change the recording profile from NORMAL to EVENT
while the VMD event is active and then back to NORMAL when the event ends.
Alarm Profile Change: If ticked, an alarm event will change the recording profile from NORMAL to
EVENT while the alarm event is active and then back to NORMAL when the event ends.
N/C Alarm: Used with Alarm Input events. The factory default for TransVu alarm inputs is normally
open, closing on alarm. Ticking the N/C Alarm box reverse the sense of the alarms configured by
this wizard to normally closed, opening on alarm.
DB VMD Entry: If ticked a VMD event will create a database entry, allowing the event to be found
by event searches of Enterprise Observer and Pick-a-Point Software.
DB Alarm Entry: If ticked an Alarm Input event will create a database entry, allowing the event to be
found by event searches of Enterprise Observer and Pick-a-Point Software.
Report VMD: If ticked a VMD event will be reported to an RVRC.
Report Alarm: If ticked a Alarm event will be reported to an RVRC.
Exp Editor: Click on this button to view the Expression Editor page.
Expression Editor page
The way in which the TransVu handles alarms is different in comparison with earlier Dedicated
Micros CCTV recorders.
