Page 15 of 66.
Title TransVu 3 DVR Installation Manual
NetVu Ltd.
No 1 Thellow Heath Park, Northwich Road, Northwich, Cheshire. CW9 6JB
Connecting an HDMI Video Monitor
An HDMI monitor may be connected to TransVu 3 using a commercially made HDMI cable. The
HDMI socket is located beneath a blanking plate below the hard disk drive caddy.
Connecting a Composite Video Monitor
Signal type:
Unbalanced, ground common to chassis
Signal level:
1 volt peak to peak
Signal termination:
75 ohms, fixed
Recommended cable:
Coaxial, 75 ohm impedance, 90% copper braid, copper multicore
central conductor.
TransVu 3 incorporates a 75 Ohm composite video output
Connecting Audio
Signal type:
Unbalanced, common analogue ground
Input type:
Microphone or line sensitivity software selectable
Signal level:
Line in: 1 x 1V peak to peak
Line out: 1 x 1V peak to peak
Microphone: 1 x 50mV to 1.5V peak to peak with Bias Supply