28
My-Netti.com
Model:
Netti 4U BASE
Language:
English
Version:
2022-03
7.2 BACKREST ANGLE
The backrest angle is regulated using the release
handle mounted on the push bar. The angle can be
regulated from 90° forward to 45° backwards.
To ensure correct function of the wires, these
must never be taut.
The seat and back-rest angle must not be
adjusted without using the anti-tips.
The release handles has each on of the following
label:
Tilt
Recline
Risk for tipping. Check the position of
anti-tip.
When chair back extension is mounted, the
tipping risk increases. If necessary it should
be improved by moving the main wheels
further back. Always use anti-tippers when
recline and tilt functions are being activated.
7.1 SEAT ANGLE
The seat angle is regulated using the release handle
mounted on the push bar.
The seat unit can be tilted from -5° to +20°.
If you adjust the seat tilt below 0°, there is an
increased risk of slipping forward out of the
chair. Alu Rehab recommends the use of a
hip belt to prevent falling out of the chair.
7. SEAT ANGLE/TILT AND BACK ANGLE/RECLINE
