23
Model:
Netti 4U BASE
Language:
English
Version:
2022-03
My-Netti.com
6.12 HEAD SUPPORT
A – Lever for depth adjustment
B – Wheel for angle adjustment
C – Lever for height adjustment
D – Head support bracket
• Place the squared nut in the slot of the head
support bracket as shown above.
• Place the head support in the head support
bracket.
• The height and the depth of the head support is
set to the required positions and tightened.
• The head support bracket is fixed by tightening
the four screws two by two diagonally so the
bracket is fixed with the same strength divided on
the four screws.
Adjusting the calf support:
The calf support is height and depth adjustable.
To adjust height unfix the nut on the outside of the
calf support bracket, find the required height and fix
the nut again (A).
10 mm open-end spanner.
To adjust in depth, the calf pad is removed
from the bracket by using an open-end
spanner between the pad and the bracket.
Find the required position and refix it (B).
13 mm open-end spanner.
Never stand on the foot plates!
Never lift the wheelchair by the leg supports.
