16
24" main
wheel
24"
main
wheel
16"
main
wheel
12" main wheel
24", 16" and
12" main wheel
24" main wheel
My-Netti.com
Model:
Netti 4U BASE
Language:
English
Version:
2022-03
Main wheels and front castors should be mounted
according to the positions described below.
When the seat height is changed ensure that
the front castors are placed so that the lower
frame tube is parallel with the ground.
Check the position of the anti-tip and
readjustthe brakes after mounting the main
wheels or changing the main wheel position.
24” main wheel
24”,16”and
12” main wheel
16”
12” main wheel
24” main wheel
6.4 SEAT HEIGHT ADJUSTMENT
The seat height at the rear depends on:
• Size of main wheel.
• Position of main wheel.
• Using 24” main wheels in the upper hole, the seat
height is 46.5 cm from the floor to the seating
plate. Using 24” main wheels in the next lower
position, the height will measure 500 mm to the
seating plate.
• Using 22” main wheels in the upper hole, the
seat height is 44 cm from the floor to the seating
plate. Using 22” main wheels in the next lower
position, the height will measure 475 mm to the
seating plate.
If it is required to change position of the main
wheels or to change to a different size of main
wheels, unfix the hub bushing including washer and
nut. Remove the hub bushing and mount it in the
required position.
2 pc 24 mm open-end spanners.
Make sure that the nut on inside of frame
totally wreathes the wheel bushing.
