24
My-Netti.com
Model:
Netti 4U BASE
Language:
English
Version:
2022-03
If the head support stand does not fit
thebracket perfectly the bracket is probably
fixed too tight or unevenly.
After fitting the head support fix it properly
by tightening the little set screw in the centre
on top of the head support bracket using an
Allen key.
If the head support seems to short in height,
it can be turned 180° by releasing the
adjustment wheel at the rear of the
horizontal bar (B).
Adjusting the head support in depth:
• Release the locking lever on top of the vertical
bar (A).
• Adjust the head support and fix it in required
position.
Adjusting the head support in height:
• Release the locking lever on the head support
adapter (C).
• Adjust the head support and fix it in required
position.
Adjusting the head support in angle:
• Release the adjustment wheel at the rear of the
horizontal bar (B).
• Adjust the head support and fix it in required
position.
Adjusting the head support sideways:
• The head support adapter can be moved both
to the right and left, giving the possibility to
accommodate special needs for head support.
• Loosen the four screws holding the adapter
together.
• Move the adapter to the required position and fix
the adapter by tightening the screws diagonally.
Remember to release the levers when
adjusting the head support.
