background image

35  

Model: 

Netti 4U BASE

Language: 

English

 

Version:

 

2022-03

My-Netti.com

Using a hoist. 

Before transfer to chair:

•  Tilt the chair back.

•  Remove the head support.

•  Remove the leg supports.

•  Open the back rest angle slightly.

•   Replace the components when transfer is finished.

   Never stand on the foot plates due to the risk 

of tipping the chair forwards.

8.7     TRANSFER

Techniques for transfering to / from the wheelchair 

should be practiced well with the persons 

involved. Here, we give some important advices for 

preparation of the chair:

With or without companion – sideways. 

Before transfer:

•   The wheelchair should be placed as close as 

possible to the destination of the transfer.

•   Pull the wheelchair backwards 50 – 100 mm in 

order to make the front castors turn forward.

•  Lock the brakes.

•   Remove leg support and arm support on the side 

of the transfer.

•  Tilt chair to horizontal position.

With or without companion – forwards. 

Before transfer:

•   The wheelchair should be placed as close as 

possible to the destination of the transfer.

•   Pull the wheelchair backwards 50 – 100 mm in 

order to make the front castors turn forward.

•  Lock the brakes.

•  Tilt chair forward.

Содержание GMDN 41620

















































Отзывы: