background image

14  

My-Netti.com

Model: 

Netti 4U BASE

Language: 

English

 

Version:

 

2022-03

6.   ASSEMBLING AND 

ADJUSTMENT

  

For information about adapting the 

wheelchair to the user, please see:  

My-Netti.com Knowledge center.

6.1     UNPACKING

  1.   Unpack all the parts, and check that 

everything is there according to the  

packing list.

  2.   Mount the main wheels (Chapter 6.2).

  3.   Mount the front castors (Chapter 6.3).

  4.   Check and adjust the seat depth (Chap. 6.7).

  5.   Mount the back rest (Chapter 6.5).

  6.  Mount the seat cushion (Chapter 6.9).   

  7.  Mount the leg supports (Chapter 6.10). 

  8.  Mount the head support (Chapter 6.11). 

  9.  Mount any accessories (Chapter 5).

Weight of components (450 mm chair width):

Main wheels:  

1,9 kg each

Anti-tip:  

0,1 kg each

Front castors:  

0,8 kg each

Leg support angle adj.: 

2 kg each

Netti Seat cushion:  

App. 1,0 kg

Head support A:  

1,0 kg

Head support C:  

0,9 kg

5.1  ASSEMBLING OF HIP BELT

•   Pull the belt through the hole in the  

hip belt bracket.

 

•   Thread the belt back through the belt clamp.

•   Fix the hip belt bracket to the back rest hinge  

in the rearmost hole, using the enclosed screws 

and nut.

  

2 pc 13 mm open-end spanner.

Содержание GMDN 41620

















































Отзывы: