18
My-Netti.com
Model:
Netti 4U BASE
Language:
English
Version:
2022-03
6.7 SEAT DEPTH ADJUSTMENT
IN FRONT
It is possible to adjust the seat depth with up to
100 mm in front to get the knee pivot point aligned
with leg support pivot point. Do the following.
• Screw out the screws in the adjustment piece.
• Place the adjustment piece in the wanted
position.
• Replace and tighten the screws.
6 mm Allen-key.
If the user has spastic tendencies the
adjustment piece should not be pulled out
more than 50 mm.
6.6 SEAT DEPTH ADJUSTMENT
AT THE REAR
• If the seat depth should be adjusted at the rear,
release the locking bolt from the plastic bracket.
• Find the required position for the locking head in
the plastic bracket, and remove the plastic plug
from this hole.
• Lock the back rest by pushing the locking bolt
through the plastic bracket and the gas spring
locking head.
• After changing the hole position in the plastic
bracket, the hole position in the back rest hinge
must be changed into the parallel position.
Check that the hole in the back rest hinge
and the plastic bracket are mounted in
parallel position.
6 mm Allen-key.
