manualshive.com logo in svg

Netscout aircheck G2, Руководство пользователя

Поделиться
Скачать
Netscout aircheck G2 Скачать руководство пользователя страница 44

Discovering Clients

31

 

Save: 

Touch this button to save a session file containing 

the discovery or test results that have been collected since 

the AirCheck G2 last refreshed. 

See “Saving Sessions and 

Packet Captures,” page 85.

 

Troubleshoot: If the Tester Does Not Discover 

a Client

In some situations, the Tester will not discover a client 

because of the following:

The wireless card in the client is disabled.

The Tester cannot hear the client because you are too far 

away from the client.

The Tester cannot hear the client because the signal 

cannot go through a wall or some other barrier.

There is too much interference on the channel that the 

client uses. Select 

Channels

 to see the interference from 

non-802.11 sources on the channel. 

The Tester does not scan the band that the client uses. 

See the setting in 

 

Settings

 >

 802.11 Settings

.

The client does not transmit when the Tester is listening 

to the channel that the client uses.

A 

Filter

 is active on the current screen that is filtering out 

one or more clients. Touch 

 to clear the filter.

The Interferers Only Scan setting is enabled in 

 

Settings > Interferer Settings.

Содержание aircheck G2














































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды