manualshive.com logo in svg

Netscout aircheck G2, Руководство пользователя

Поделиться
Скачать
Netscout aircheck G2 Скачать руководство пользователя страница 36

Viewing Channel Usage

23

The Select Channel Screen

The 

Select Channel

 screen offers a close-up view of the 

selected channel. 

Figure 11. Select Channel Screen 

The channel being selected.

The number of APs on the channel. 

The bar graphs show how much of the channel capacity 

is used by 802.11 devices (

blue

) and by non-802.11 

interference (

gray

). The graphs update dynamically.

The next lower and upper adjacent channels (faded).

The left and right arrows for scrolling the lower or higher 

channels.

NOTE: 

When you are on the 

Select Channel

 screen, AirCheck 

G2 stops scanning channels and remains only on the channel 

that is selected. 
Touch the middle channel bar or 

View Details

 to open the 

Channel Details

 screen for the selected channel.

Содержание aircheck G2














































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды