Netscout aircheck G2 Скачать руководство пользователя страница 117

Страница: 117 / 141

All AirCheck G2 Settings

104

Location Settings

The Location Settings screen allows you to choose or change

AirCheck G2's location settings, which determine the legality

of Wi-Fi channels in the selected country or region of the

world. Channels that are illegal in the selected country will

display in

red

text on AirCheck G2. AirCheck G2 will not

transmit Wi-Fi probe packets on channels that are illegal for

the currently selected country.

See “How to: Change the location settings,” page 48.

Manage Files

See “Saving Test Sessions and Managing Files,” page 85.

Device Settings

The

Device Settings

screen provides tools for configuring the

device settings, as listed below.

NOTE:

Touch an option to configure it. While some

options (i.e., Number Format, Audio, Brightness, Restore

Factory Defaults, and Export Log) can be managed

directly on the

Device Settings

screen, many will open

separate screens with tools for configuring those

settings.

Date and Time:

Configures the date and time on AirCheck

G2.

Language:

Sets the AirCheck G2's language.

Number Format:

Toggles between 0.0 and 0,0 number

formats. By default, AirCheck G2 uses the decimal (0.0)

number format. You can change to comma (0,0) number

format (or vice versa) by touching the down arrow

selecting the new format, and touching

Apply

Audio:

Turns audio

Off

. Audio is used when locating

APs or clients.

USB Headset Volume:

Increases or decreases the headset

audio volume when a USB headset is connected to AirCheck

G2.

NOTE:

When a USB headset is plugged into the AirCheck

G2, audio automatically switches to the headset.

Содержание aircheck G2














































































































































Результаты поиска

Содержание aircheck G2

Отзывы:

Бренды по названию

Популярные бренды

Netscout aircheck G2, Руководство пользователя

Результаты поиска

Содержание aircheck G2

Отзывы:

Бренды по названию

Популярные бренды