manualshive.com logo in svg

Netopia R910, Руководство пользователя

"Netopia R910" - это мощный маршрутизатор, обеспечивающий быструю и стабильную сеть. Скачайте бесплатный Пользовательский справочный руководство с manualshive.com для получения полной информации о настройке и использовании этого устройства. Не упустите возможность загрузить руководство перед использованием.

Поделиться
Скачать
background image

B-178  User’s Reference Guide

There are two schemes for distributing the remaining IP addresses: 

■

Manually give each computer an address 

■

Let the Netopia R910 automatically distribute the addresses

These two methods are not mutually exclusive; you can manually issue some of the addresses while the rest 
are distributed by the Netopia R910. Using the router in this way allows it to function as an address ser ver.

One reason to use the Netopia R910 as an address ser ver is that it takes less time than manually distributing 
the addresses. This is par ticularly true if you have many addresses to distribute. You need to enter information 
only once, rather than having to repeatedly enter it on each host separately. This also reduces the potential for 
misconfiguring hosts.

Another reason to use the Netopia R910 as an address ser ver is that it will distribute addresses only to hosts 
that need to use them.

All Netopia R910s come with an integrated Dynamic Host Control Protocol (DHCP) ser ver. Some routers also 
come with a Macintosh Internet Protocol (MacIP) ser ver. These ser vers provide a means of distributing IP 
addresses to either a Mac or PC workstation as needed.

When setting up the DHCP or MacIP ser vers in the Netopia R910, it is necessar y to understand how 
workstations lease, renew, and release their IP addresses. This information is helpful in determining dynamic 
address allocation for a network.

The term “lease” describes the action of a workstation requesting and using an IP address. The address is 
dynamic and can be returned to the address pool at a later time.

The term “renew” refers to what the workstations do to keep their leased IP address. At cer tain inter vals, the 
workstation talks to the DHCP or MacIP ser ver and renews the lease on that IP address. This renewal allows 
the workstation to keep and use the assigned IP address until the next renewal period.

The term “release” refers to a situation where the workstation is no longer using its assigned IP address or has 
been shut down. IP addresses can be manually released as well. The IP address goes back into the DHCP or 
MacIP address pool to be reassigned to another workstation as needed.

Technical note on subnet masking

Note:

The IP address supplied by the Netopia R910 will be a unique number. You may want to replace this 

number with a number that your ISP supplies if you are configuring the router for a static IP address. The 
automatic IP mask supplied by Smar tStar t is a Class C address. However, the Netopia R910 and all devices on 
the same local network must have the same subnet mask. If you require a different class address, you can edit 
the IP Mask field to enter the correct address. Refer to the table below. 

Number of Devices (other than 

Netopia R910) on Local Network

Largest Possible Ethernet Subnet 

Mask

1

255.255.255.252

2-5

255.255.255.248

6-13

255.255.255.240

14-29

255.255.255.224

Содержание R910


















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для R910

3Com 3C410012A - OfficeConnect Remote 531 Access... Getting Started Manual preview
3C410012A - OfficeConnect Remote 531 Access...
Бренд: 3Com Страницы: 72
PaloAlto Networks ION 1200 Series Hardware Reference Manual preview
ION 1200 Series
Бренд: PaloAlto Networks Страницы: 90
XMOS XC-2 Quick Start Manual preview
XC-2
Бренд: XMOS Страницы: 6
Patton electronics SmartNode 4520 Series Getting Started Manual preview
SmartNode 4520 Series
Бренд: Patton electronics Страницы: 90
ADTRAN NetVanta 873 Specifications preview
NetVanta 873
Бренд: ADTRAN Страницы: 2
CyberTAN WR214C User Manual preview
WR214C
Бренд: CyberTAN Страницы: 67
ADC HiGain H2TU-R-402 List 7A Quick Installation preview
HiGain H2TU-R-402 List 7A
Бренд: ADC Страницы: 7
Renesas H8S/2633 User Manual preview
H8S/2633
Бренд: Renesas Страницы: 28
Digital Equipment ChannelWorks Network Installer Manual preview
ChannelWorks
Бренд: Digital Equipment Страницы: 90
Goonas LC180 User Manual preview
LC180
Бренд: Goonas Страницы: 13
Devolo dLAN 200 AVsmart+ Technical Data preview
dLAN 200 AVsmart+
Бренд: Devolo Страницы: 2
Cabletron Systems TRXMIM-24A User Manual preview
TRXMIM-24A
Бренд: Cabletron Systems Страницы: 56
Beckhoff CU8210-D001-0200 Manual preview
CU8210-D001-0200
Бренд: Beckhoff Страницы: 25
LevelOne ServCon FPS-3003 Quick Install Manual preview
ServCon FPS-3003
Бренд: LevelOne Страницы: 45
Multitech ROUTE FINDER RFIPSC-1 Quick Start Manual preview
ROUTE FINDER RFIPSC-1
Бренд: Multitech Страницы: 54
King Pigeon N80 User Manual preview
N80
Бренд: King Pigeon Страницы: 8
Westermo Viper 408 Manual preview
Viper 408
Бренд: Westermo Страницы: 22
ProCurve 800 Configuration Manual preview
800
Бренд: ProCurve Страницы: 406

Бренды по названию

Популярные бренды

Загрузить еще бренды