manualshive.com logo in svg

Netopia R910, Руководство пользователя

"Netopia R910" - это мощный маршрутизатор, обеспечивающий быструю и стабильную сеть. Скачайте бесплатный Пользовательский справочный руководство с manualshive.com для получения полной информации о настройке и использовании этого устройства. Не упустите возможность загрузить руководство перед использованием.

Поделиться
Скачать
background image

9-68  User’s Reference Guide

IP Address Pools

The IP Address Pools screen allows you to configure a separate IP address ser ving pool for each of up to eight 
configured Ethernet IP subnets:

This screen consists of between two and eight rows of four columns each. There are exactly as many rows as 
there are Ethernet IP subnets configured on the IP Subnets screen.

■

The Subnet (# host addrs) column is non-selectable and non-editable. It indicates the network address of 
the Ethernet IP subnet for which an address pool is being configured and the number of host addresses 
available on the subnet. The network address is equal to the router’s IP address on the subnet 
bitwise-ANDed with the subnet mask. The host address count is equal to the subnet size minus three, 
since one address is reser ved for the network address, one for the subnet broadcast address, and one for 
the router’s inter face address on the subnet.

You can edit the remaining columns in each row.

■

The 1st Client Addr and Clients columns allow you to specify the base and extent of the address ser ving 
pool for a par ticular subnet. Entering 0.0.0.0 for the first client address or 0 for the number of clients 
indicates that no addresses will be ser ved from the corresponding Ethernet IP subnet.

■

The Client Gateway column allows you to specify the default gateway address that will be provided to 
clients ser ved an address from the corresponding pool. The value defaults to the Netopia R910’s IP 
address on the corresponding subnet (or the Netopia R910’s default gateway, if that gateway is located on 
the subnet in question). You can override the value by entering any address that is par t of the subnet.

DHCP, BootP, and dynamic WAN clients may receive an address from any one of the address ser ving pools 
configured on this screen.

                              IP Address Pools

   Subnet (# host addrs)       1st Client Addr   Clients   Client Gateway
   ---------------------       ---------------   -------   --------------
   192.128.117.0   (253)       192.128.117.196   16        192.128.117.162

   192.129.117.0   (253)       192.129.117.110   8         192.129.117.4

Содержание R910


















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для R910

CAME QBEMFSB2 User Manual preview
QBEMFSB2
Бренд: CAME Страницы: 19
D-Link DSR-500 User Manual preview
DSR-500
Бренд: D-Link Страницы: 213
E-Tech Wireless Mini PCI Module User Manual preview
Wireless Mini PCI Module
Бренд: E-Tech Страницы: 42
XNET INS2000 Install Manual preview
INS2000
Бренд: XNET Страницы: 17
Baicells EG2013B-M11 User Manual preview
EG2013B-M11
Бренд: Baicells Страницы: 10
NETGEAR RP614 - Web Safe Router Installation Manual preview
RP614 - Web Safe Router
Бренд: NETGEAR Страницы: 16
IEI Technology PulM-1G4T-I211 Quick Installation Manual preview
PulM-1G4T-I211
Бренд: IEI Technology Страницы: 2
Xantech CC62 Installation Instructions preview
CC62
Бренд: Xantech Страницы: 5
OneAccess One80XM Installation Manual preview
One80XM
Бренд: OneAccess Страницы: 47
Amit CDD531AM-U02 User Manual preview
CDD531AM-U02
Бренд: Amit Страницы: 75
Dantel 44118 Installation & Operation Manual preview
44118
Бренд: Dantel Страницы: 22
Intercel eSAM AK-SM 800 User Manual preview
eSAM AK-SM 800
Бренд: Intercel Страницы: 17
GE 82-POE User Manual preview
82-POE
Бренд: GE Страницы: 226
RadioLabs O2Breeze Bridging Instructions preview
O2Breeze
Бренд: RadioLabs Страницы: 10
Gree WSBEC02 Instructional Manual preview
WSBEC02
Бренд: Gree Страницы: 2
NETGEAR AirBridge WBC502 User Manual preview
AirBridge WBC502
Бренд: NETGEAR Страницы: 7
Panasonic Phototransistors PNZ154NC Specifications preview
Phototransistors PNZ154NC
Бренд: Panasonic Страницы: 3
Panasonic PIN Diodes MA27P07 Specifications preview
PIN Diodes MA27P07
Бренд: Panasonic Страницы: 3

Бренды по названию

Популярные бренды

Загрузить еще бренды