manualshive.com logo in svg

Netopia R910, Руководство пользователя

"Netopia R910" - это мощный маршрутизатор, обеспечивающий быструю и стабильную сеть. Скачайте бесплатный Пользовательский справочный руководство с manualshive.com для получения полной информации о настройке и использовании этого устройства. Не упустите возможность загрузить руководство перед использованием.

Поделиться
Скачать
background image

8-44  User’s Reference Guide

■

Address Translation Enabled

 allows you to specify whether or not the router per forms Network Address 

Translation (NAT) on the Ethernet WAN por t. NAT is enabled by default.

■

Local WAN IP Address

 allows you to manually configure an IP address for use on the Ethernet WAN por t. 

The value 0.0.0.0 indicates that the device will act as a DHCP client on the Ethernet WAN por t and attempt 
to acquire an address from a DHCP ser ver. By default, the router acts as a DHCP client on the Ethernet 
WAN por t.

■

Local WAN IP Mask

 allows you to manually configure an IP subnet mask for use on the Ethernet WAN por t. 

This item is visible only if you have configured a non-zero Ethernet IP Address; other wise, the router obtains 
a subnet mask via DHCP.

■

The 

Filter Set

 pop-up allows you to associate an IP filter set with the Ethernet WAN por t. See 

“About filters 

and filter sets” on page 13-126

.

■

Remove Filter Set

 allows you to remove a previously associated filter set.

■

The 

Receive RIP

 pop-up controls the reception and transmission of Routing Information Protocol (RIP) 

packets on the Ethernet WAN por t. The default is Both. The Transmit RIP pop-up is hidden if NAT is 
enabled.

Routing Information Protocol (RIP) is needed if there are IP routers on other segments of your Ethernet 
network that the Netopia R910 needs to recognize. Set to “Both” (the default) the Netopia R910 will 
accept information from either RIP v1 or v2 routers. Alternatively, select 

Receive RIP

 and select 

v1

 or 

v2

 

from the popup menu. With Receive RIP set to “v1,” the Netopia R910’s Ethernet por t will accept routing 
information provided by RIP packets from other routers that use the same subnet mask. Set to “v2,” the 
Netopia R910 will accept routing information provided by RIP packets from other routers that use different 
subnet masks.

If you want the Netopia R910 to adver tise its routing table to other routers via RIP, select 

Transmit RIP

 and 

select 

v1

, 

v2 (broadcast)

, or 

v2 (multicast)

 from the popup menu. With Transmit RIP v1 selected, the 

Netopia R910 will generate RIP packets only to other RIP v1 routers. With Transmit RIP v2 (broadcast) 
selected, the Netopia R910 will generate RIP packets to all other hosts on the network. With Transmit RIP 
v2 (multicast) selected, the Netopia R910 will generate RIP packets only to other routers capable of 
recognizing RIP v2 packets.

System configuration screens 

You can connect to the Netopia R910’s system configuration screens in either of two ways:

■

By using Telnet with the Router’s Ethernet por t IP address

■

Through the console por t, using a local terminal (see 

“Connecting a console cable to your router” on 

page 6-33

)

You can also retrieve the Netopia R910’s configuration information and remotely set its parameters using the 
Simple Network Management Protocol (see 

“SNMP” on page 12-118

).

Open a Telnet connection to the router’s IP address; for example, “192.168.1.1.” 

Содержание R910


















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для R910

Opengear IMG4216-25 Quick Start Manual preview
IMG4216-25
Бренд: Opengear Страницы: 2
Sangamo CHOICE PR1 User Instructions preview
CHOICE PR1
Бренд: Sangamo Страницы: 2
ZyXEL Communications XGS4700 Series Manual preview
XGS4700 Series
Бренд: ZyXEL Communications Страницы: 485
Tandberg Data SUPERLOADER DLT MAGAZINE Quick Start Manual preview
SUPERLOADER DLT MAGAZINE
Бренд: Tandberg Data Страницы: 6
Rabbit RabbitCore RCM4400W Product Manual preview
RabbitCore RCM4400W
Бренд: Rabbit Страницы: 126
4Home ControlPoint 2000 User Manual preview
ControlPoint 2000
Бренд: 4Home Страницы: 20
SmartBridges airHaul Nexus sB3010 User Manual preview
airHaul Nexus sB3010
Бренд: SmartBridges Страницы: 80
RouterBOARD OmniTik UPA-5HnD Quick Setup Manual And Warranty Information preview
OmniTik UPA-5HnD
Бренд: RouterBOARD Страницы: 4
QNAP TS 73A Series User Manual preview
TS 73A Series
Бренд: QNAP Страницы: 68
ICP DAS USA PDS-734 Quick Start Manual preview
PDS-734
Бренд: ICP DAS USA Страницы: 8
Lantech TWAP-5006 User Manual preview
TWAP-5006
Бренд: Lantech Страницы: 20
socomec ATyS g M 2P Instruction Manual preview
ATyS g M 2P
Бренд: socomec Страницы: 54
D-Link DES-1026G Manual preview
DES-1026G
Бренд: D-Link Страницы: 16
Billion BiPAC 7800NL User Manual preview
BiPAC 7800NL
Бренд: Billion Страницы: 170
Infrant Technologies READYNAS X6 Installation Manual preview
READYNAS X6
Бренд: Infrant Technologies Страницы: 2
MikroTik CCR1009-7G-1C-1S+ Quick Manual preview
CCR1009-7G-1C-1S+
Бренд: MikroTik Страницы: 9
Dell PowerVault Manual preview
PowerVault
Бренд: Dell Страницы: 396
Dell PowerVault 600 Getting Started preview
PowerVault 600
Бренд: Dell Страницы: 180

Бренды по названию

Популярные бренды

Загрузить еще бренды