manualshive.com logo in svg

Netopia R910, Руководство пользователя

"Netopia R910" - это мощный маршрутизатор, обеспечивающий быструю и стабильную сеть. Скачайте бесплатный Пользовательский справочный руководство с manualshive.com для получения полной информации о настройке и использовании этого устройства. Не упустите возможность загрузить руководство перед использованием.

Поделиться
Скачать
background image

13-152  User’s Reference Guide

If you select 

Advanced Security Options

 and press Return, the Advanced Security Options screen appears.

■

You select your desired mode by using the 

Security Databases…

 pop-up menu.

■

Choosing 

Local Only

, the default, selects the standard authentication mechanism.

■

Choosing 

RADIUS Only

 causes the router to ignore the local database and to authenticate users using 

the configured RADIUS ser ver.

■

Choosing 

RADIUS then Local

 causes the router to attempt to authenticate a user first using a RADIUS 

ser ver and then, if that fails, using the local authentication database.

■

Choosing 

Local then RADIUS

 causes the router to attempt to authenticate a user first using the local 

authentication database, and then, if that fails using the configured RADIUS ser ver.

Note:

In the latter two modes that involve both RADIUS and the local database, if the local database includes 

no username/password pairs, authentication will succeed only if the RADIUS ser ver authenticates the user. 
This differs from the Local Only mode where no authentication is per formed when the local database is empty.

The alternate RADIUS ser ver is not contacted if the primar y RADIUS ser ver responds, but responds with an 
Access-Reject or Access-Challenge response, only if the primar y ser ver fails to respond at all.

Therefore, do not attempt to select any of the RADIUS options unless you have a RADIUS ser ver correctly 
configured for this purpose. If you attempt to use RADIUS authentication without a RADIUS ser ver, you will lose 
your communication with the router.

The Advanced Security Options screen suppor ts both a primar y RADIUS ser ver and an alternate RADIUS 
ser ver. When the router is configured to authenticate using RADIUS, it will first attempt to contact the 
primar y RADIUS ser ver; if the primar y RADIUS ser ver responds, RADIUS authentication succeeds or fails 
based on the response returned by the primar y ser ver. If and only if the primar y ser ver fails to respond, the 
router will attempt to contact the alternate RADIUS ser ver to authenticate the user. The router makes two 
attempts per ser ver, three seconds apar t. 

■

You can specify the 

RADIUS Server Addr/Name

 and the 

Alt RADIUS Server Addr/Name

 either by using a 

                           Advanced Security Options
                                          +-------------------+
                                          +-------------------+
         Security Databases...            | Local only        |
                                          | RADIUS only       |
         RADIUS Server Addr/Name:         | RADIUS then Local |
         RADIUS Server Secret:            | Local then RADIUS |
         Alt RADIUS Server Addr/Name:     +-------------------+
         Alt RADIUS Server Secret:
         RADIUS Identifer:
         RADIUS Server Authentication Port: 1812

Содержание R910


















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для R910

NEC Univerge SV8100 System Configuration Manual preview
Univerge SV8100
Бренд: NEC Страницы: 44
Sagem 2604 Quick Installation Manual preview
2604
Бренд: Sagem Страницы: 19
D-Link DSL-2730B Technical Support preview
DSL-2730B
Бренд: D-Link Страницы: 5
D-Link GO-SW-5E Quick Install Manual preview
GO-SW-5E
Бренд: D-Link Страницы: 2
Campbell NL115 Instruction Manual preview
NL115
Бренд: Campbell Страницы: 42
H3C SR8800 IM-FW-II Command Reference Manual preview
SR8800 IM-FW-II
Бренд: H3C Страницы: 107
3Com MSR 50 Series Safety Information Manual preview
MSR 50 Series
Бренд: 3Com Страницы: 12
H3C S9500 Series Operating Manual preview
S9500 Series
Бренд: H3C Страницы: 16
H3C H3C S3600 Series Datasheet preview
H3C S3600 Series
Бренд: H3C Страницы: 10
H3C MSR 930 Installation Manual preview
MSR 930
Бренд: H3C Страницы: 42
H3C MSR 800 Installation, Quick Start preview
MSR 800
Бренд: H3C Страницы: 2
H3C H3C S7500E Series Instruction Manual preview
H3C S7500E Series
Бренд: H3C Страницы: 34
H3C MSR Series Manual preview
MSR Series
Бренд: H3C Страницы: 33
H3C CR16000-F Configuration Manual preview
CR16000-F
Бренд: H3C Страницы: 14
H3C MSR 3600 Hardware Information And Specifications preview
MSR 3600
Бренд: H3C Страницы: 56
H3C H3C S7500E Series Configuration Manual preview
H3C S7500E Series
Бренд: H3C Страницы: 112
H3C S3100-52P Command Manual preview
S3100-52P
Бренд: H3C Страницы: 15
H3C SR8800 IM-FW-II Manual preview
SR8800 IM-FW-II
Бренд: H3C Страницы: 5

Бренды по названию

Популярные бренды

Загрузить еще бренды