manualshive.com logo in svg

Netopia R910, Руководство пользователя, Страница: 132 / 209

Поделиться
Скачать
Netopia R910 Скачать руководство пользователя страница 132

13-132  User’s Reference Guide

4.

The filter should be enabled and instructed to block the Telnet packets containing the source address 
shown in step 2:

■

On? = Yes

■

Fwd = No

This four-step process is how we produced the following filter from the original rule:

Filtering example #2

Suppose a filter is configured to block all incoming IP packets with the source IP address of 200.233.14.0, 
regardless of the type of connection or its destination. The filter would look like this:

This filter blocks any packets coming from a remote network with the IP network address 200.233.14.0. The 0 
at the end of the address signifies 

any

 host on the class C IP network 200.233.14.0. If, for example, the filter 

is applied to a packet with the source IP address 200.233.14.5, it will block it.

In this case, the mask, which does not appear in the table, must be set to 255.255.255.0. This way, all 
packets with a source address of 200.233.14.x will be matched correctly, no matter what the final address byte 
is.

Note:

The protocol attribute for this filter is 0 by default. This tells the filter to ignore the IP protocol or type of 

IP packet.

Design guidelines

Careful thought must go into designing a new filter set. You should consider the following guidelines: 

■

Be sure the filter set’s overall purpose is clear from the beginning. A vague purpose can lead to a faulty 
set, and that can actually make your network 

less

 secure.

■

Be sure each individual filter’s purpose is clear.

■

Determine how filter priority will affect the set’s actions. Test the set (on paper) by determining how the 
filters would respond to a number of different hypothetical packets.

■

Consider the combined effect of the filters. If ever y filter in a set fails to match on a par ticular packet, the 
packet is:

■

Passed if all the filters are configured to discard (

not

 for ward)

   +-#---Source IP Addr---Dest IP Addr-----Proto-Src.Port-D.Port--On?-Fwd-+
   +----------------------------------------------------------------------+
   | 1   192.211.211.17   0.0.0.0          TCP   0        23      Yes No  |
   |                                                                      |
   +----------------------------------------------------------------------+

   +-#---Source IP Addr---Dest IP Addr-----Proto-Src.Port-D.Port--On?-Fwd-+
   +----------------------------------------------------------------------+
   | 1   200.233.14.0     0.0.0.0                0                Yes No  |
   |                                                                      |
   +----------------------------------------------------------------------+

Содержание R910


















































































































































































































Отзывы:

Нет отзывов