Supplemental Information
42
WN804 Access Point
Factory Default Settings
You can return the access point to its factory settings. Use the end of a paper clip or a similar
object to press and hold the
Reset
button on the back of the access point for at least 7
seconds. The access point resets and returns to the factory configuration settings shown in
the following table.
Feature
Default behavior
Access point
login
User login URL
http://192.168.0.233
User name (case-sensitive)
admin
Login password (case-sensitive)
password
Ethernet
connection
Ethernet MAC address
See the product label.
Access point mode
On
Port speed
10/100 Mpbs
Local network
(LAN)
LAN IP
192.168.0.233
Subnet mask
255.255.255.0
Gateway address
192.168.0.1
DHCP client
Disabled
Time zone
Pacific time
Time zone automatically adjusts
for daylight savings time
Disabled
Wireless
Wireless communication
Enabled
SSID name
See the product label.
Security
WPA2-PSK (AES)
Broadcast SSID
Enabled
Transmission speed
Auto
1
1. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary.
Network conditions and environmental factors, including volume of network traffic, building materials and
construction, and network overhead, lower actual data throughput rate.
Country/region
Asia
RF channel
Auto
Operating mode
Up to 270 Mbps at 2.4GHz
