Advanced Configuration
37
WN804 Access Point
2.
Select
Advanced Setup > Wireless Repeating Function
.
3.
Select the
Enable Wireless Repeating Function
check box.
4.
Select the
Wireless Repeater
radio button.
5.
Fill in the Repeater IP Address field.
This IP address has to be in the same subnet as the base station, but different from the
LAN IP address of the base station.
6.
(Optional) Select the
Disable Wireless Client Association
check box to prevent wireless
clients from associating with the repeater and allowing LAN client associations only.
You can leave the check box cleared if you prefer wireless clients to be able to associate
with the repeater.
7.
In the Base Station MAC Address field, enter the MAC addresses for the access point that
should function as the base station.
8.
Click
Apply
.
Your settings are saved.
9.
Verify connectivity across the LANs.
A computer on any wireless or wired LAN segment of the access point can connect to the
Internet or share files and printers with any other computer or server connected to the
other access point.
