Advanced Configuration
30
WN804 Access Point
Advanced Wireless Settings
You can use this screen to turn the wireless radio on and off, to specify WPS settings, to use
AP mode, and to set up a wireless access list.
The Fragmentation Length, CTS/RTS Threshold, and Preamble Mode options in this screen
are reserved for wireless testing and advanced configuration only. Do not change these
settings unless you have a specific reason to do so.
Control the Wireless Radio
By default, the wireless radio is enabled so that you can connect wirelessly to the access
point. You can turn the wireless radio on or off in the Advanced Wireless Settings screen or
by using the WiFi On/Off button on the access point front panel. When the wireless radio is
off, you can still use an Ethernet cable for a LAN connection to the access point.
To turn the wireless radio on or off:
1.
Select
Advanced Setup > Wireless Settings
.
By default, the Enable Wireless AP Radio check box is selected.
2.
Select or clear the
Enable Wireless AP Radio
check box.
If you clear this check box, this turns off the WiFi feature of the wireless access point.
3.
(Optional) Select the
Turn off wireless signal by schedule
check box and fill in the fields
to specify the times when you do not need a wireless connection.
For example, you could turn off the wireless signal for the weekend if you leave town.
4.
Click
Apply
.
Your changes take effect.
