NETGEAR WG103 ProSafe, Справочное руководство

Страница: 62 / 120

WG103 ProSafe 802.11g Wireless Access Point Reference Manual
4-10 Managing Your Network
v1.0, February 2009
Viewing Statistics
To view the network traffic statistics for the wired (Ethernet LAN) and wireless (WLAN)
interfaces of the wireless access point:
1. Log in to the wireless access point at its default LAN address of http://192.168.0.229 with its
default user name of admin and default password of password , or using whatever password
and LAN address you have chosen for the wireless access point.
2. Select Monitoring > Statistics . The Statistics screen displays (see Figure 4-9 on page 4-11 ).
Table 4-2 on page 4-11 describes the statistics fields.
Current IP Settings
You can configure these settings in “Configure Basic IP Settings” on page 2-7 .
IP Address The IP address of the wireless access point.
Subnet Mask The subnet mask for the wireless access point.
Default Gateway The default gateway for the wireless access point communication.
DHCP Client If this is enabled, the current IP address was obtained from a DHCP
server on your network. Disabled indicates a static IP configuration.
Current Wireless Settings
Access Point Mode The operating mode of the wireless access point: access point, point-
to-point bridge, multi-point bridge, or repeater. To change these
settings, see
“Wireless Bridging and Repeating” on page 5-9 .
Channel/Frequency The channel the wireless port uses. The default channel setting is
automatic channel selection. To change these settings, see
“Configure
Basic Wireless Settings” on page 2-8 . For the frequencies used on
each channel, see the online document that you can access from
“Wireless Networking Basics” in Appendix B .
Rogue AP Detection Indicates whether rogue AP detection is enabled or not. To change
these settings, see
“Enabling Rogue AP Detection” on page 4-19 .
Table 4-1. System Information Fields (continued)
Field Description